Test and Measurement Instruments

Handheld Scanners, OHV100 and OHV200: read 1D and 2D codes in to PCs, smartphones and tablets

Reliable reading on reflective surfaces with the OHV100 and OHV200 handheld scanners

For part detection and goods allocation, handheld scanners for 1D and 2D codes are an indispensable tool in day-to-day industrial operations. Crucial in terms of their efficiency are a high reading performance, ease of use, and additional functions that make the user's job easier. These include flexible options for adapting the handheld scanner to the respective application and connection to smartphones and tablet PCs.

Loop Calibrator, Ultimate

The new Ultimate Loop Calibrator - iCAL LC 12 is ideal for sourcing, measuring and simulating Loop current, mV and V. It is compact, rugged and easy to use hand held device with graphical user interface. Masibus LC 12 Loop Calibrator is designed to provide base accuracy of 0.02% of Reading in all modes of operation. LC 12 has simultaneous Source and Sense capability with independent parameter and range selection for source and sense, also the source and sense circuits are isolated from each other, 2W simulate and Read/Power are unique features for Loop testing and calibration...

Industrial Video Borescope

Godrej Electricals and electronics' Industrial Electronics & Automation Embedded Solutions division offers industrial video borescope.

Godrej Industrial video Borescope is small, portable and convenient to use in the harsh environmental condition.

It is used for visual inspection and quality assurance in following industries:

  • Automobile,
  • Forging
  • Pharmaceutical, etc.                                                                         

It comprises of two parts viz. Camera probe and display device. There is variety of interchangeable Camera probe which is inserted inside the job which is to be inspected and accordingly the handheld display device displays the image. The Camera probe consists of CCD or CMOS technology camera which gives you a clear picture of the inspecting job with 720X480 pixels.

The probe is equipped with white led Lights to focus and provide brilliant, even illumination in the darkest areas. The probes are water-, oil-, gas-, diesel-proof and available in different lengthsThe operator can capture images or record videos which are stored in the memory card / pen drive.

The Borescope can be connected to Laptop/ Desktop or to a Television and visualize. Optional side view mirror tip can be used to check the walls of the job and controlled movement of probe tip (Articulation) is used to control the direction of the probe.

New High-Frequency SNAP I/O Modules from Opto 22 Expand Analog Signal Options for SNAP PAC System

High-frequency SNAP-AIRATE-HFi rate input and SNAP-AOD-29-HFi pulse-width modulation (PWM) modules support testing, simulation, and other high-speed applications.

Industrial automation manufacturer Opto 22 has announced the 2 new high-frequency analog SNAP I/O modules: the SNAP-AIRATE-HFi rate-input module and the SNAP-AOD-29-HFi module with pulse-width modulation (PWM) and time-proportional output (TPO).

Measuring light grids.

IO-Link Provides Measurement Output Data in Millimetres. Bright Ideas for Measuring. The new LGM Series measuring light grids provide the measured values directly in millimeters.

The new LGM Series measuring light grids provide the measured values directly in millimeters

Surge Voltage Protection for Modbus RS-485

Low signal levels with high frequencies require special protective circuits in the field of data processing & telecommunications. Lightning strikes, power source fluctuations, inductive switching, and electrostatic discharge can cause damage to RS-485 transceivers by generating large transient voltages. The surge protector must guarantee short reaction times to quickly limit surge voltages to safe values, without Impairing the quality of signals.

Temperature and humidity transmitter, KH-706

We are an eminent name, which is engaged in delivering Temperature Humidity Transmitter to our clients. The offered range of temperature humidity transmitters is designed & developed utilizing high grade raw material and highly modern machines in strict tandem with the industry laid norms and standards. Along with this, the offered range of temperature humidity transmitters is known for its robust construction and longer functional life.

Cognex Introduced New Lighting and Optics features for Dataman 300 Series of industrial barcode readers

New options provide customers with more flexibility and control.

Cognex Corporation has introduced new lighting and optics features for its Dataman® 300 series of industrial barcode readers. Since its launch, DataMan 300 has quickly become the preferred barcode reader due to its outstanding read rate performance and ease of use. The demand is now set to continue with the introduction of the most flexible optics and lighting features available on any image-based fixed-mount barcode reader.

Visual IR thermometer

Fluke Corporation introduces the Fluke® VT02 Visual IR Thermometer, a troubleshooting camera with an infrared heat map. Until now, electricians and industrial, HVAC, and automotive technicians have had to choose between single-point infrared thermometers and high-resolution thermal imagers (infrared or “IR” cameras).

The Fluke VT02 Visual IR Thermometer fills the gap, for when a single-spot temperature reading isn’t enough and a high-resolution thermal image is more than users need. One tool combines the visual insight of a thermal imager, the visual images of a digital camera, and the point-and-shoot convenience of an IR (infrared) thermometer.

I/O Controller, Modbus series

The Titania Modbus series compact I/O modules are a revolution in technology targeted at automation applications which require cost effective solutions, the robust Titania Modbus Modules are leading the way in innovation.This modules may be implemented and integrated into a wide variety of automation platforms. The 2 modules are available, namely the Titania Modbus DI-16 and the Titania Modbus Di-8 DO-8. Both modules support Modbus RTU/ASCII as their native communication protocol.

Differential pressure transducer with LCD display

Controller and Instrumentation Group (CIG) of Katlax offers Differential Pressure Transducer (DPT) Differential pressure transducer measures pressure differences between two points and give proportional analogue output (0 to 10V or 4-20 mA). This device can communicate on different communication protocol i.e. MODBUS, RS232, and RS485 etc. Katlax differential pressure transducers are available with various measuring ranges starts from -0.5 mbar to 100 mbar. These devices are available with LCD display and without display. Description:

Large Digital Display Indicator

Emtech Controls, Ahmedabad – India has recently launched large digital display indicator –in 4 Inch size. This one and only indicator have 0 to 9999 display count. It has signal Input from 0 to 10V DC / 0 to 20 mA DC or 4 to 20 mA, proxi input, encoder input or 24V DC pulse / 230V AC pulse.

Emtech make large display Indicator’s display range are selectable up to 9999 with decimal point selection. This Indicator is ideal for textile industry, paper industry, and printing & packaging industry.

Oscilloscopes, Portable for harsh industrial environments

Fluke Corporation, the global leader in portable electronic test and measurement technology, has introduced the Fluke ScopeMeter® 190 Series II handheld portable oscilloscopes, the first four-channel scopes designed for harsh industrial environments.

These new portable scopes are the first safety rated for CAT III 1000 V / CAT IV 600 V environments. The four input channels are fully isolated from each other to perform differential floating measurements, a critical consideration for troubleshooting fixed-installation three-phase power electronic devices like variable speed motor drives.

Control center for all Cognex vision systems and industrial ID products

Cognex corporation the world’s leading supplier of machine vision systems, recently launched the Cognex Explorer™ control center. This unique utility displays a graphical view of all Cognex vision systems, ID readers and visualization systems connected to the network. It also incorporates powerful maintenance tools for backing up, restoring or cloning systems, carrying out firmware upgrades, and much more.

Optical character Recognition (OCR) and Verification (OCV)

Cognex sets a new standard for industrial OCR

Cognex Corporation (NASDAQ: CGNX), the world's leading supplier of machine vision systems, has introduced OCRMax™, a new tool for optical character recognition (OCR) and verification (OCV) applications that gives Cognex vision systems and vision software the power to achieve the highest read rates while keeping misreads to a minimum. OCRMax is fast, easy to set up and simple to use across all In-Sight® vision system and VisionPro® vision software platforms.

ALC Driver Amplifier

Indian Space Research Organisation (ISRO) at its Space Applications Centre (SAC) has designed , developed and qualified a Automatic Level Control (ALC) Driver Amplifier. The system has been used in ISRO’s GEOSAT payload projects.

     Digital Magazines

December'15/January 2016